View TN6729A00_1327576.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TN6729A / NZT6729
TN6729A
NZT6729
C
E C C
TO-226
B E
B
SOT-223
PNP General Purpose Amplifier
This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 800 mA. Sourced from Process 79.
Absolute Maximum Ratings*
Symbol
VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous
TA = 25C unless otherwise noted
Parameter
Value
80 80 5.0 1.0 -55 to +150
Units
V V V A C
Operating and Storage Junction Temperature Range
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors.
Thermal Characteristics
Symbol
PD RJC RJA
TA = 25C unless otherwise noted
Characteristic
Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient TN6729A 1.0 8.0 50 125
Max
*NZT6729 1.0 8.0 125
Units
W mW/C C/W C/W
*Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.
1997 Fairchild Semiconductor Corporation
TN6729A / NZT6729
PNP General Purpose Amplifier
(continued)
Electrical Characteristics
Symbol Parameter
TA = 25C unless otherwise noted
Test Conditions
Min
Max
Units
OFF CHARACTERISTICS
V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Cutoff Current Emitter-Cutoff Current IC = 1.0 mA, IB = 0 IC = 100 A, IE = 0 IE = 1.0 mA, IC = 0 VCB = 60 V, IE = 0 VEB = 5.0 V, IC = 0 80 80 5.0 0.1 10 V V V A A
ON CHARACTERISTICS*
hFE DC Current Gain IC = 50 mA, VCE = 1.0 V IC = 250 mA, VCE = 1.0 V IC = 500 mA, VCE = 1.0 V IC = 250 mA, IB = 10 mA IC = 250 mA, IB = 25 mA IC = 250 mA, VCE = 1.0 V 80 50 20 250 0.5 0.35 1.2 V V V
VCE(sat) VBE(on)
Collector-Emitter Saturation Voltage Base-Emitter On Voltage
SMALL SIGNAL CHARACTERISTICS
hfe Ccb Small-Signal Current Gain Collector-Base Capacitance IC = 200 mA, VCE = 5.0 V, f = 20 MHz VCB = 10 V, IE = 0, f = 1.0 MHz 2.5 25 30 pF
*Pulse Test: Pulse Width 300 s, Duty Cycle 1.0%
NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.
3
Typical Characteristics
200
V CE = 1.0 V
VCESAT - COLLECTOR EM ITTE R VOLTAGE (V)
h FE - TYPICAL PULSED CURRENT GAIN
Typical Pulsed Current Gain vs Collector Current
Collector-Emitter Saturation Voltage vs Collector Current
2 1 = 10
150
125 C
25 C
100
25 C
0.1
- 40 C 125 C
50
- 40 C
0 0.01
0.02 0.05 0.1 0.5 I C - COLLECTOR CURRENT (A)
1
0.01 10
100 I C - COLLECTOR CURRE NT (mA)
1000
TN6729A / NZT6729
PNP General Purpose Amplifier
(continued)
Typical Characteristics
(continued)
V BE( ON)- BAS E EMITTER ON VOLTAGE (V)
V BESAT - BASE EM ITTE R VOLTAGE (V)
Base-Emitter Saturation Voltage vs Collector Current
1 = 10
- 40 C
Base Emitter ON Voltage vs Collector Current
1
0.8
- 40 C 25 C
0.8
25 C 125 C
0.6
0.6
125 C
0.4
V CE = 5V
0.4 1 10 100 I C - COLLECTOR CURRE NT (mA) 1000
0.2
1
10 100 I C - COLLECTOR CURRE NT (mA)
1000
obo - COLLECTOR-BASE CAPACITANCE (pF)
Collect or-Cutoff Current vs Ambient Temperature
I CBO - COLLECTOR CURRENT (nA) 100
V CB = 60V
Collector-Base Capacitance vs Collector-Base Voltage
40
f = 1.0 MHz
30
10
1
20
0.1
10
0.01 25
0 0 4 8 12 16 20 24 28
50 75 100 T A - AMBIE NT TEMP ERATURE ( C)
125
V CB - COLLECTOR-BASE VOLTAGE (V)
- GAIN BANDWIDTH PRODUCT (MHz)
Gain Bandwidth Product vs Collector Current
250
V CE = 10V
Safe Operating Area TO-226 / SOT-223
10 I C - COLLECTOR CURRENT (A)
10 S *
200 150 100 50 0
1
DC
1 00 T
S *
DC
*PULSED OPERATION T A = 25 C
T
CO 1 .0 LL EC ms TO RL * EA AM D= BIE 25 NT C =
0.1
25
C
LIMIT DETERMINED BY BV CEO
0.01 1 10 100 I C - COLLECTOR CURRENT (mA) 1000
f
T
1
10 V CE - COLLECTOR-EMITTER VOLTAGE (V)
100
TN6729A / NZT6729
PNP General Purpose Amplifier
(continued)
Typical Characteristics (continued)
Power Dissipation vs Ambient Temperature
1 P D - POWER DISSIPATION (W)
0.75
TO-226 SOT-223
0.5
0.25
0
0
25
50 75 100 TEMPERATURE ( o C)
125
150
3
TO-226AE Tape and Reel Data
TO -226AE Packaging Conf iguratio n: Fi gur e 1.0
TAPE and REEL OPTION
FSCINT Label sampl e
FAIRCHIL D S EMICONDUCTOR CORPORATION L OT:
S e Fig 2 e .0 for va rious
HTB:B 10000
Reeli g Styles n
CBVK741B019
QTY:
NSID:
PN2222N
SP EC:
FSCINT
SP EC RE V: QA REV:
D/C1:
D9842
B2
Labe l 5 Reels per Int er med iate B ox
(FSCINT)
F63TNR Label s ampl e
LOT: CBVK7 41B019 QTY: 2000
Cus tom ized Labe l
F63TNR Labe l Cus tom ized
FSID: PN222N
SPEC:
D/C1: D9842 D/C2:
QTY1: QTY2:
SPEC REV: CPN: N/F: F
(F63TNR)3
Labe l 375m m x 267m m x 375mm Int er med iate B ox
AMMO PACK OPTION
S e Fig 3 e .0 for 2 Ammo Pack Option s
TO-226AE TNR/AMMO PACKING INF R O MATION
Packing Reel
Style A E
Qua ntity 2,000 2,000 2,000 2,000
EOL code D26Z D27Z D74Z D75Z
Am m o
M P
FSCINT Labe l 327m m x 158m m x 135mm Im med iate B ox 5 A mm o box es per Int er med iate B ox
Uni t wei gh t Reel weig ht wi th c om po nents Amm o weig ht wi th c omp on en ts
= 0.300g m = 0.868 k g = 0.880 k g
Cus tom ized Labe l
Max q uanti ty p er i nte rm ed iate b ox = 10,000 un its
Cus tom ized Labe l
F63TNR Bar c ode Label 333m m x 231m m x 183mm Int er med iate B ox
BULK OPTION
S e Bulk P e acking Informat ion tabl e
Anti -stati c FSCINT Bar c ode Label
(TO-226AE ) BULK PACKING INFORMATION
LEADCLIP DIMENSION NO L EAD CLIP NO L EAD CLIP NO L EADCLIP
Bub ble Sheets
EOL CO DE J18Z J05Z NO EOL CODE
DESCRIPTION TO-18 OPTION STD TO-5 OPTION STD
QUANTITY 1.0 K / BOX 1.0 K / BOX 1.5 K / BOX
1,500 un its per EO70 box for s td o pti on
114m m x 102m m x 51mm EO70 Im mediate B ox
TO-226 STANDARD STRAIGHT
5 EO70 boxes pe r Int er med iate B ox
530m m x 130m m x 83mm Inter med iate box
Cus tomized Label
FSCINT Labe l 7,500 un its m axim um per interm edi at e box for st d opt ion
(c)2000 Fairchild Semiconductor International
October 1999, Rev. A1
TO-226AE Tape and Reel Data, continued
TO-226AE Reeling Style Configuration: Fi gure 2.0
Machine Option "A" (H) Machine Option "E"(J)
Style "A" D26Z, D70Z (s/h)
Style "E" D 27Z, D71Z (s/h)
TO-226AE Radial Ammo Packaging Configuration: Fi gure 3.0
FIRST WIRE OFF IS EMITTER (ON PKG. 92) FIRST WIRE OFF IS COL LECTOR (ON PKG. 92) ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE D74Z (M)
ORDER STYLE D75Z (P)
FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COL LECTOR ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP
October 1999, Rev. A1
TO-226AE Tape and Reel Data, continued
TO-226AE Tape and Reel T aping Dimension Configuration: Fi gur e 4.0
Hd P Pd
b Hb W1 L H1 HO L1 S
d
WO W2 W
t
t1
P1
F1 DO
P2
ITEM DESCRI PTION Base of P ackage to Le ad Bend Componen Height t Lead Clinch He ight Component Base Heig ht Componen Alignm t ent (s ide / side ) Componen Alignm t ent ( front/bac ) k Componen Pitch t Feed H ole P itch Hole Center to First Lead Hole Center to C omponen C t enter Lead Spread Lead T hickness Cut Le ad Length Taped L ead Le ngt h Taped L ead T hicknes s
SYM BOL b Hb HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S
DIMENSION 0.098 (max) 1.078 ( +/- 0. 050) 0.630 ( +/- 0. 020) 0.748 ( +/- 0. 020) 0.040 (max ) 0.03 (max 1 ) 0.500 ( +/- 0. 020) 0.500 ( +/- 0. 008) 0.150 (+0.009, -0.010 ) 0.247 ( +/- 0. 007) 0.104 ( +/- 0 . 010) 0.018 (+0.002, -0.003) 0.429 (max ) 0.209 (+0.05 -0.052 1, ) 0.032 ( +/- 0. 006) 0.02 ( 1 +/- 0. 006) 0.708 (+0.02 -0.019) 0, 0.236 ( +/- 0. 012) 0.035 (max ) 0.360 ( +/- 0. 025) 0.157 (+0.008, -0.007) 0.004 (max )
PO
User Direction of Feed
TO-226AE Reel Configuration: Fi gur e 5.0
Carrier T ape Thickness Carrier Tape W idth Hold - down T ape W idth Hold - down T ape position Feed H ole P osition Sprocket Hole Diam eter Lead Spring O ut
E LE CT ROS TA TIC S EN SI TIV E D EV ICE S
Note : All d imensions ar in inches. e
D4
D1
ITEM D ESCRIPT IO N
SYMBO L
MINIMUM
MAXIMUM
F63TNR Label
D2
Reel Diamet er Arbor H ole Diam eter (Standard)
D1 D2 D2 D3 D4 W1 W2 W3
13 .975 1.160 0. 0 65 3. 0 10 2. 0 70 0.370 1.630
14 .025 1.200 0.700 3.300 3.100 0.570 1.690 2.09 0
Custom ized Label
(Small H ole) Core D iam eter Hub R ecess Inner Diam eter Hu Recess Dept h b Flange to F lange Inner W idth
W1
Hu b to Hu b Cente r W idth
W3
W2
Note: All dimensions are inches
D3
October 1999, Rev. A1
TO-226AE Package Dimensions
TO-226AE (FS PKG Code 95, 99)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 0.300
S4.70-4.32; S1.52-1.02;
2" TYP
S7.87-7.37;
S7.73-7.10;
S1.65-1.27;
2" TYP
0.51
S0.760.36;
S15.61-14.47;
S0.51-0.36;
S0.48-0.30;
S1.401.14;
S1.40-1.14;
PIN
99 E B C
95 E C B
S4.45-3.81; 1 5" TYP 2 3
1
2
3
TO-226AE (95,99)
S2.41-2.13;
For leadformed option ordering, refer to Tape & Reel data information.
October 1999, Rev. A1
(c)2000 Fairchild Semiconductor International
SOT-223 Tape and Reel Data
SOT-223 Packaging Configuration: Figure 1.0
Customized Label
Packaging Description:
SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped.
F63TNR Label Antistatic Cover Tape
Static Dissipative Embossed Carrier Tape
F852 014
SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 2,500 13" Dia 343x64x343 5,000 0.1246 0.7250 D84Z TNR 500 7" Dia 184x187x47 1,000 0.1246 0.1532
F852 014
F852 014
F852 014
SOT-223 Unit Orientation
343mm x 342mm x 64mm Intermediate box for Standard
F63TNR Label
F63TNR Label 184mm x 184mm x 47mm Pizza Box for D84Z Option
F63TNR Label sample
LOT: CBVK741B019 FSID: PN2222A QTY: 3000 SPEC:
SOT-223 Tape Leader and Trailer Configuration: Figure 2.0
D/C1: D9842 D/C2:
QTY1: QTY2:
SPEC REV: CPN: N/F: F
(F63TNR)3
Carrier Tape Cover Tape
Components Trailer Tape 300mm minimum or 38 empty pockets Leader Tape 500mm minimum or 62 empty pockets
(c)2000 Fairchild Semiconductor International
September 1999, Rev. B
SOT-223 Tape and Reel Data, continued
SOT-223 Embossed Carrier Tape Configuration: Figure 3.0
T E1
P0
D0
F K0 Wc B0 E2 W
Tc A0 P1 D1
User Direction of Feed
Dimensions are in millimeter Pkg type SOT-223 (12mm)
A0
6.83 +/-0.10
B0
7.42 +/-0.10
W
12.0 +/-0.3
D0
1.55 +/-0.05
D1
1.50 +/-0.10
E1
1.75 +/-0.10
E2
10.25 min
F
5.50 +/-0.05
P1
8.0 +/-0.1
P0
4.0 +/-0.1
K0
1.88 +/-0.10
T
0.292 +/0.0130
Wc
9.5 +/-0.025
Tc
0.06 +/-0.02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line
0.5mm maximum
B0 20 deg maximum component rotation
0.5mm maximum
Sketch A (Side or Front Sectional View)
Component Rotation
A0 Sketch B (Top View)
Typical component center line
Sketch C (Top View)
Component lateral movement
SOT-223 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A Max
Dim A max
Dim N
See detail AA
7" Diameter Option
B Min Dim C See detail AA W3
Dim D min
13" Diameter Option
W2 max Measured at Hub DETAIL AA
Dimensions are in inches and millimeters
Tape Size
12mm
Reel Option
7" Dia
Dim A
7.00 177.8 13.00 330
Dim B
0.059 1.5 0.059 1.5
Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2
Dim D
0.795 20.2 0.795 20.2
Dim N
5.906 150 7.00 178
Dim W1
0.488 +0.078/-0.000 12.4 +2/0 0.488 +0.078/-0.000 12.4 +2/0
Dim W2
0.724 18.4 0.724 18.4
Dim W3 (LSL-USL)
0.469 - 0.606 11.9 - 15.4 0.469 - 0.606 11.9 - 15.4
12mm
13" Dia
July 1999, Rev. B
SOT-223 Package Dimensions
SOT-223 (FS PKG Code 47)
1:1
Scale 1:1 on letter size paper
Part Weight per unit (gram): 0.1246
(c)2000 Fairchild Semiconductor International
September 1999, Rev. C
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST
DISCLAIMER
FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM
PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8
SyncFETTM TinyLogicTM UHCTM VCXTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. G

▲Up To Search▲

Price & Availability of TN6729A00

	To Download TN6729A00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .